QUALITY LIFE STARTS WITH WARMTH
—— SELECTED HVAC SYSTEMS ——
T35 axial flow ventilator
T35 axial flow fan is a common ventilation products
Key words:
Kunming Lifei
Equipment
Ventilator
HVAC
Classification:
Business Description
Usage
T35 axial flow fan is a common ventilation products, but also a series of axial flow fan inside the large category of axial flow fan, T35 is mainly for general factories, warehouses, offices, residential and other occasions of ventilation or to strengthen the warmth of the heat dissipation of the use of the casing, if removed, but also as a free fan, but also in the longer exhaust pipe spacing tandem installation, in order to improve the wind pressure in the pipeline. t35 type Axial fan is based on similar foreign products, through the model test research, to determine the fan blade type, the use of a cylindrical hub structure, while the motor has been modified design, reducing the flow loss, so that the fan efficiency exports by the circular area increased to 77%, according to the export of the ring area increased to 89.5%, the noise is lower than the A sound by 3.6dB, but also to enhance the strength of the leaf root, to avoid the phenomenon of blade breakage. It also enhances the strength at the leaf root and avoids the phenomenon of blade breakage.
Common model numbers
T35 axial fan represents a series of axial fan general name, the product according to the impeller diameter is divided into 13 kinds of machine number, in order of № 2.8, 3.15, 3.55, 4, 4.5, 5, 5.6, 6.3, 7.1, 8, 9, 10, 11.2 and so on. Each model can be installed at 5 angles: 15°, 20°, 25°, 30° and 35°.
The T35 axial fan series adopts a direct connection structure where the impeller is directly mounted on the motor shaft. Under the condition that the circumferential speed of the impeller does not exceed 60m/S, three kinds of rotational speeds are used: 2900, 1450, 960r/min, the impeller rotates counterclockwise when facing the direction of air inlet, and the direction of air inlet is at the end of the impeller.
Before the fan leaves the factory, it has been tested in operation to ensure smooth operation.
Structure
T35 axial fan mainly consists of impeller, casing, air collector and other three parts.
1、Impeller of T35 axial fan: it consists of blades and hub, and the blades are made of thin steel plate and are welded to the hub according to the selected mounting angle.
2, T35 axial fan casing: by the wind cylinder, bracket composition, are made of thin steel and profiles, the wind cylinder for the cylinder type, and the impeller has a certain gap between.
3, T35 axial fan collector: by the collector flange, collector composition, collector for the arc streamline type, can reduce the loss of airflow inlet, made of thin steel plate.
Related Products
Panel-type smoke exhaust outlet
Explosion-proof centrifugal fans
DWT-II centrifugal roof ventilator
CFG type ducted low noise ventilator
4-72 type A centrifugal ventilator
Product Inquiry
FOLLOW US
Advisory Hotline
Address: Chenghuang Road, Guandu District, Kunming City (opposite Kunming Zhiwang Industrial Co., Ltd.)
All rights reserved©2024 Kunming Lifei HVAC Equipment Co., Ltd. Website Construction:300.cn Kunming Privacy Agreement